PLA Fibre Staple 0.89-2.22dtex*38mm for Clothing

• Customization: Available
• Transport Package: Package
• Origin: China
• Model NO.: szhy303
• Production Capacity: 50000ton/

Product Description

Product Information
Polylactic acid is a new type of polyester material, compared with traditional petroleum-based polyester and natural fibre cotton, it has many characteristics such as natural anti-bacteria, anti-mite, skin-friendly, breathable, non-toxic, odourless, flame-retardant, UV-resistant, and biodegradable, etc., and it is a green and low-carbon fibre that combines natural fibre and chemical fibre into a single unit so far.
PLA indicator

Item	viscose	modal	silk	1.2Dpolyester	1.2D PLA
Fibre unevenness %	10.0-14.0	8.0-12.0	11.0-16.0	5.0-9.0	7.0-9.0
Strong CV%	10.0-23.0	5.0-14.0	7.0-14.0	7.0-9.0	14.0-18.0
Elongation CV%	10.0-25.0	6.0-20.0	8.0-16.0	10.0-20.0	7.0-11.0

Item	Rupture StrengthCN/dtex			Breaking Strengthcv%			Elongation at break(%)			Elongation at break CV%
	original value	Day 15	Day 30	original value	Day 15	Day 30	original value	Day 15	Day 30	original value	Day 15	Day 30
Test data	4.02	3.35	3.13	14.6	20.7	23.2	30.9	28.4	26.6	7.4	11.8	14.8
Increase (decrease)range%		-16.7	-22.1		6.1	8.6		-2.5	-4.3		4.4	7.4

Excellent properties of PLA
Warm, lightweight, quick-drying
The thermal conductivity of PLA fibre 0.0348 W/m°C is lower than that of cotton, linen, silk, wool, polyester, acrylic, close to kapok, and higher than that of down and still air.PLA fibre has a low moisture return rate of 0.5%, which avoids the loss of warmth brought about by the high rate of textile moisture return.PLA fibre has a low density, is lightweight and fluffy, and does not have any moisture return, which is also favourable for warmth retention. At the same time has a unique core suction effect can be quickly dried after washing.
Skin-friendly, breathable, anti-allergenic
PLA fabrics have good moisture conduction and quick drying function, good breathability, the human body sweating clothes will not stick to the skin like cotton to make people feel uncomfortable, but can be sweat out, so that people are comfortable. In addition, PLA material surface star weak acidity, healthy human skin is also weak acidity, therefore, its compatibility with the human body is good, skin-friendly, will not cause skin allergies, especially suitable for use as bedding, sportswear and other products.
Refractory, low smoke, non-toxic
PLA fibre limit oxygen index 25-27% (close to the national standard of 28% of the requirements of flame retardant fibre), belongs to the flame retardant fibre, superior to cotton, spandex, nylon, acrylic and other fibres, even if the combustion, only a small amount of smoke release, no black smoke, no toxic gases in the smoke; combustion of heat is small, but also its self-extinguishing time is short, the fire danger is small.
Product Specification 
3.33-6.67dtex*38mm or 51mm, 64mm (Hollow Fibre)
0.89-2.22dtex*38mm(Conventional ), 
0.89-2.22dtex*38mm (SM)
0.89-2.22dtex*38mm.Hydrolysis-resistant series

Eco-friendly Green Biodegradable
PLA product waste can be completely decomposed into carbon dioxide and water under industrial composting conditions (temperature 58°C ° C, humidity 98% and microbiological conditions) for 3 to 6 months, which has very good environmental protection effects. The U.S. Food and Drug Administration (FDA) has approved its use as a biodegradable biomedical material, and its high level of safety has been confirmed.
shipment